About this document
This is far from being a full course in Haskell, it’s purely intended to get you through the A level syllabus. Many important features of Haskell are omitted, the most important being how Haskell handles types – you’ll need to learn about these if you want to learn Haskell properly.
A good place to start is http://learnyouahaskell.com/ by Miran Lipovaca
Using the Haskell Interpreter
The Haskell interpreter will load, showing the Prelude> prompt. Prelude refers to the standard module imported by default into all Haskell modules: it contains all the basic functions and types you need.
Try out some arithmetic operators as follows:
Prelude> 3+4 7 Prelude> (5*6)+7 37 Prelude> 2^12 4096
Saving Your Work
Here’s an example of how to save your functions and load them into the interpreter.
- Open your favourite text editor (Notepad, Notepad++, TextEdit, Emacs, Vim, …) and type in some Haskell functions. I’ve given two simple examples below.
areaCircle x = 3.14 * x * x areaSquare x = x * x
- Save the file. I’ve saved my file as c:/haskell/example.hs
- Run the Haskell interpreter
- Type :l c:/haskell/example.hs to load your functions into the interpreter. You should see that the prompt now says Main>. Main refers to the module you just loaded. Note, you still have access to the Prelude functions
- Experiment using your functions in the Haskell interpreter. If you make changes to your functions, hit :r to reload the file.
areaCircle 3 28.26 areaSquare 4 16
- The perimeter of circle
- The perimeter of a square
- The perimeter of a rectangle
AQA Quick Reference
Be familiar with representing a list as a concatenation of a head and a tail. Know that the head is an element of a list and the tail is a list.
Know that a list can be empty.
Describe and apply the following operations:
- return head of list
- return tail of list
- test for empty list
- return length of list
- construct an empty list
- prepend an item to a list
- append an item to a list.
Have experience writing programs for the list operations mentioned above in a functional programming language or in a language with support for the functional paradigm
|Create a list||let xs = [1,2,3,4,5]|
|return head of list||head xs|
|return tail of list||tail xs|
|test for empty list||null xs|
|return length of list||length xs|
|construct an empty list||xs = |
|prepend an item to a list||element : xs|
|append an item to a list||xs ++ [element]|
Going beyond the specification, there are many more list examples here: https://wiki.haskell.org/How_to_work_on_lists
- [1,2,3] OK
- [‘a’,’b’,’c’] OK
- [1,’b’,2] X Not allowed
A string is simply a list of characters
“This” = [‘T’,’h’,’i’,’s’]
Haskell lists have a head and tail, they also have an init and a last (see below for examples of these). You can prepend an element to a list (add it to the front) using the : operator, and concatenate (join) two lists using the ++ operator.
Use the : operator for preference in Haskell: it’s much faster than ++
Here are some examples to illustrate the above
Prelude> let xs = [1,2,3,4,5] Prelude> head xs 1 Prelude> tail xs [2,3,4,5] Prelude> init xs [1,2,3,4] Prelude> last xs 5 Prelude> tail xs ++ init xs [2,3,4,5,1,2,3,4] Prelude> head xs ++ last xs <interactive>:15:1: No instance for (Num [a0]) arising from a use of Â¡Â®itÂ¡Â¯ In a stmt of an interactive GHCi command: print it Prelude> [head xs] ++ [last xs] [1,5] Prelude> xs!!2 3 Prelude> xs!!6 *** Exception: Prelude.(!!): index too large Prelude> xs!!0 1 Prelude> 0:xs [0,1,2,3,4,5] Prelude> xs ++ 6 <interactive>:25:1: No instance for (Num [a0]) arising from a use of Â¡Â®itÂ¡Â¯ In a stmt of an interactive GHCi command: print it Prelude> xs ++  [1,2,3,4,5,6]
- Write a list containing the days of the week
- Find the head of the list
- Find the tail of the list
- Find the last element of the list
- Find the last but one element of the list
- A new day is invented: Haskellday. Prepend this to the list
Remember that a string is a list of characters. Let name = <your name>
- Find the first character in your name
- Find the last character
- Find the length of your name.
- Find all the characters but the last.
- What output will the following produce?
let ls = [1,2,3,4,5] last ls:init ls ++ tail ls ++ [head ls] ++ [ls!!3]
- Why is [head ls] written as a list, and not as an element, eg head ls?
A Brief Diversion: List Comprehensions and Ranges
Let’s start with some ranges
Prelude> [1..5] [1,2,3,4,5] Prelude> [1,3..10] [1,3,5,7,9] Prelude> [10,9..1] [10,9,8,7,6,5,4,3,2,1] Prelude> [-5,-3..5] [-5,-3,-1,1,3,5]
Now for some list comprehensions. The following examples show how to draw down from ranges in a list comprehension
Prelude> [x*2 | x <- [1..5]] [2,4,6,8,10] Prelude> [x*x | x <- [1..10]] [1,4,9,16,25,36,49,64,81,100]
You can add predicates to restrict the values of a list comprehension as follows
Prelude> [x | x <- [1..10], odd x] [1,3,5,7,9]
You can add more than one predicate. What are the even numbers between 1 and 50 that are divisible by 3?
Prelude> [x|x<-[1..50], x `mod` 3==0, even x] [6,12,18,24,30,36,42,48]
You can draw down from two variables as follows. Watch out for the order! Note that x**y means x to the power of y
Prelude> [x**y | x <- [1..5], y <- [2,3,4]] [1.0,1.0,1.0,4.0,8.0,16.0,9.0,27.0,81.0,16.0,64.0,256.0,25.0,125.0,625.0] Prelude> [x**y | y <- [2,3,4], x <- [1..5]] [1.0,4.0,9.0,16.0,25.0,1.0,8.0,27.0,64.0,125.0,1.0,16.0,81.0,256.0,625.0]
List Comprehension Exercise
Haskell and Lazy Evaluation
This means you can write down things that might not lead to errors in imperative languages.
take 5 [1..] [1,2,3,4,5]
The above means take the first 5 elements from the infinite list that counts up from 1. Haskell only creates as much of the list as it needs.
Combining lazy evaluation with functions that produce infinite lists means you can do such things as the following
Prelude> take 10 (cycle [1,2]) [1,2,1,2,1,2,1,2,1,2] Prelude> take 5 (repeat "Brubeck") ["Brubeck","Brubeck","Brubeck","Brubeck","Brubeck"]
- Haskell allows you to use list comprehensions to work out lists of numbers.
- A list comprehension draws down from a range (e.g. x <- [1..10]) or a number of ranges.
- You can apply predicates (e.g. odd or even) to your list comprehension to decide what goes in it.
- List comprehensions allow you to solve problems in a completely different way to imperative programming languages. For example, here’s how you’d find all the pythagorean triples (numbers such that a2 = b2+c2) for a,b,c <x.
pythagTriples x = [(a, b, c) | a <-[1..x], b <- [1..x], c <- [1..x], c^2 == a^2 + b^2]
More on Functions
More than one parameter
areaCircle x = 3.14 * x areaSquare x = x * x
Note that Haskell functions must start with lower case letters.
Remember, whilst you are learning you can type up functions in your favourite editor and then load them into the editor using :l path/to/file. Use :r to reload the functions when you’ve made changes to them.
Here’s how to write functions with two parameters:
areaRectangle l w = l*w perimeterRectangle l w = 2*l + 2*w
As and example, lets consider the areaRectangle function above. Suppose you want to work out the areas of all rectangles where one side is fixed at 3. You can write a function, area3Rect, as follows
area3Rect = areaRectangle 3
You can now work out the areas of different rectangles as follows
*Main> area3Rect 4 12 *Main> area3Rect 5 15 *Main> area3Rect 6 18 *Main>
area3Rect is a partially applied function – a function where some of the parameters have been fixed.
Try creating a partially applied function based on perimeterRectangle.
This leads us nicely on to Higher Order Functions…
Higher Order Functions
AQA Quick Reference
Have experience of using the following in a functional programming language:
- reduce or fold.
map is the name of a higher-order function that applies a given function to each element of a list, returning a list of results.
filter is the name of a higher-order function that processes a data structure, typically a list, in some order to produce a new data structure containing exactly those elements of the original data structure that match a given condition.
reduce or fold is the name of a higher-order function which reduces a list of values to a single value by repeatedly applying a combining function to the list values.
|map||map (+3) [1,2,3,4,5] -> [4,5,6,7,8]|
|filter||filter (>3) [1,2,3,4,5] -> [4,5]|
|fold||foldl (+) 0 [1..10] -> 55|
Here we map the function (+3) to the list
*Main> map (+3) [1,2,3,4,5] [4,5,6,7,8]
Here we map the odd function…
*Main> map odd [1..10] [True,False,True,False,True,False,True,False,True,False]
Here we filter the numbers >3 from the list.
*Main> filter (>3) [1,2,3,4,5] [4,5]
Here we filter out the odd numbers in a list.
*Main> filter (odd) [1..20] [1,3,5,7,9,11,13,15,17,19]
A string in Haskell is treated as a list of letters. `elem` returns true if the letter is an element of the list so…
*Main> filter (`elem` ['A'..'Z']) "What Are The Capitals In This Sentence?" "WATCITS"
Haskell gives you two types of fold, foldl which folds from the left side of a list, and foldr which folds from the right.
Fold works it way through a list one item at a time, performing an operation on that item and storing it in the accumulator.
This is probably best demonstrated with a few examples
Prelude> foldl (+) 0 [1..10] 55 Prelude> foldr (+) 0 [1..10] 55 Prelude> foldl (-) 0 [1..10] -55 Prelude> foldr (-) 0 [1..10] -5
The first example is quite straighforward. Foldl takes the first item from the list (1) adds it to the accumulator (0) and stores the result in the accumulator (1)
It then takes the second item from the list (2) adds it to the accumulator and stores the result (3). Working through the list you get the result 55.
The second and third examples are similar.
The last example is particularly interesting, however. Why does it give the result -5? Try and work through the logic, and remember that if you subtract a -ve number its the same as adding
You can use fold in haskell like you use loops in imperative languages
- Use the map function on a list [1..5] to produce a list [2..6]
- Use the map function on a list [1..10] to produce a list of even numbers [2..20]
- Use the filter function to find the odd numbers between 1 and 30
- Use the filter function to find the numbers <4 in the list [1..10]
- Use the foldl function to add up the numbers from 1 to 100
- Use the foldr function to find 4! (4 x 3 x 2 x 1)
Beyond the AQA specification
simpleCount 1 = "One" simpleCount 2 = "Two" simpleCount x = "Many"
You can use pattern matching to set base cases in recursive functions. Here’s an example of a factorial function from later on. Note how factorial 0 is defined as being 1 using pattern matching.
factorial 0 = 1 factorial n = n * factorial (n-1)
ifs and guards
People can learn to drive from the age of 17 in the UK. The following function uses to an if statement to check if someone is old enough to drive
canDrive x = if x <18 then "Too young to drive" else "Old enough to drive"
Here it is using guards:
canDrive' x | x<18 = "Too young to drive" | | otherwise = "Old enough to drive" |
The following function uses guards to work out the cost in pence of sending a large letter in the UK
letterCost weight | weight <= 100 = 96 | weight <= 250 = 127 | weight <= 500 = 171 | otherwise = 2.46
Looking at the above letterCost function you might reasonably deduce that you could send an elephant via the UK postal service for £2.46. Unfortunately, the prices given are only for large letters which can weigh no more than 1kg.
For example, in the game of fizz, you say “Fizz” if a number is divisible by 3, otherwise you just say the number. Writing a funciton to implement this can cause a problem in Haskell, as the function will have to return text or a number. One way round this is to convert the number to text using show, as follows.
fizz n | n `mod` 3 == 0 = "Fizz" | otherwise = show n
Pattern Matching, Ifs and Guards Exercise
- A function that returns “Zero” if 0 is passed, then “Odd Number” or “Even Number” if an odd or even number is passed.
- A grade function that calculates students grade as follows: A >50, B >40, C>30 otherwise fail
- A fizz function, the returns “Fizz” if a number is divisible by three, otherwise it just returns the number
- A buzz function, the returns “Buzz” if a number is divisible by five, otherwise it just returns the number
- A FizzBuzz Function that returns “FizzBuzz” if a number is divisible by 3 and 5, Fizz if it’s divisible by three and Buzz if it’s divisible by five. Otherwise, just return the number.
Functions and List Comprehensions
factors n = [x | x <- [1..n], n `mod` x == 0]
Now, remembering that a number n is prime if and only if it has two factors, [1,n], let’s define function to determine if a number is prime
prime n = factors n == [1,n]
*Main> factors 15 [1,3,5,15] *Main> factors 7 [1,7] *Main> prime 7 True *Main> prime 2 True
factorial 0 = 1 factorial n = n * factorial (n-1)
As you can see, pattern matching makes it very easy to set the base case for a recursive function. Here’s another recursive function. This one reverses a list. I’ve called my function reverse’ to distinguish it from the existing Haskell reverse function,
reverse'  =  reverse' (x:xs) = reverse(xs)++[x]
There are two important things to note here:
First, pattern matching is used to ensure the case of an empty list is handled.
Second, note the use of the (x:xs) pattern to identify the head and the tail of the list. Haskell programmers use this pattern a lot.
- The first 6 triangle numbers are 0, 1, 3, 6, 10, 15. The nth triangle number is 1 + 2 + 3 + … + n. Write a recursive method to find the nth triangle number
- Write a recursive method that returns m to the nth power, e.g. 2 to the power of 3 returns 8.
- The Harmonic Series begins 1 + 1/2 + 1/3 + 1/4 + 1/5 + … Write a recursive method that finds the Harmonic Series up to the nth term.
- The Fibonacci Series begins 1,1,2,3,5,8,13,… The next digit is the sum of the last two digits, so 1 + 1 = 2, 1 + 2 = 3 etc. Write a recursive method to print the nth fibonacci number
Find the minimum value in a list. Example: minimum’ [1,3,2] returns 1
Work out the product of a list (multiply all the numbers together) Example: product’ [2,3,4] returns 24
Count the number of zeroes in a list. Example: noZeroes [1,0,3,0,4] returns 2
Count the number of times an element appears in a list. Example numElem 4 [1,4,2,4,5] returns 2
Find the last element in a list
Lambda is a Greek letter that looks like this: λ
Haskell uses a \ as it looks a little like a lambda.
Here’s an example of a lambda function that doubles a number
*Main> (\x -> x*2) 3 6
Here’s another lambda function that multiplies two numbers
*Main> (\x y -> x*y) 3 4 12
The above example is an anonymous version of the areaRectangle function mentioned earlier.
Here’s how to use a lambda function to find the numbers that divide by 3
*Main> filter (\x -> x `mod` 3 == 0) [1..20] [3,6,9,12,15,18]
Putting it all together: Perfect Numbers
A perfect number is a number that is the sum of its factors. 6 is a perfect number as its factors are 1, 2 and 3 and 1 + 2 + 3 = 6.
Find all the perfect numbers < 10000
We know from earlier that we can find the factors of a number using the following function
factors n = [x | x <- [1..n], n `mod` x == 0]
Here’s an example
*Main> factors 6 [1,2,3,6]
Remember that a number is perfect if it’s the sum of its factors, not including the number itself, so we add an extra predicate to eliminate that.
factors n = [x | x <- [1..n], n `mod` x == 0, x/=n]
*Main> factors 6 [1,2,3]
So a number is perfect if sum (factors x) == x. Lets run a list comprehension to find the perfect numbers <1000.
*Main> [x | x <- [1..1000], sum (factors x) == x] [6,28,496]
Or use a filter…
*Main> filter (\x -> sum(factors x) == x) [1..1000] [6,28,496]
Try running that on [1..10000] to see how long it takes Haskell to figure out the next perfect number!
Please can someone Submit the Answers so I know I’m doing it right!!!!